Galvin Prime Lighting 12V Driver - 200W LED Power Supply
- Power: 200W/12V Constant Voltage
- Dimmable (with Accessories)
- Indoor Use Only - IP20 Rating
- Supplied with Australian Mains Lead
- Suitable with Galvin Prime Lighting and Accessories
Availability:
- Osborne Park: Back order
- Adelaide: Back order
- Wangara: Back order
- Bunbury: In stock
Product Information
Ports: This driver contains 8 x 3A ports, 2 x 5A ports and 1 master wired sensor port. Ensure that the lights coming from each port do not exceed that individual port's power limit (as well as not exceeding the driver's total limit). The way this is calculated is Amps x Volts = Watts, so a 3A port on this 12V driver will provide a maximum of 36W.
Output: This driver outputs a maximum of 200W, however to ensure the longevity of this power supply unit we strongly recommend that you only use up to 80% of the drivers full capacity (160W). This will help to keep your driver healthy and increase its lifespan.
Display: This driver features an electronic display on the side of the device to indicate the percentage of power being used. (Keep in mind to not exceed 80%)
Dimensions: 275mm x 71mm x 22mm
Brochures & Downloads
Staff Information
| Subtotal | $0.00 |
|---|---|
| GST | $0.00 |
| Total | $0.00 |