Head Office
(08) 9446 6333
Galvin CONTACT SPRAY RED POSTFORM 20ltr
Premium Grade SPRAY CONTACT ADHESIVE suitable for post-forming jobs
PREMIUM GRADE spray contact adhesive with FAST INITIAL GRAB High HEAT RESISTANCE Colour: Red - for easy spraying Drum Size: 20 Litres Good open time Bonds a wide range of materials including:
FIELDS OF APPLICATION Decorative laminates for cabinet making and shopfitting applications Auto upholstery and furniture upholstery
APPLICATION Workshop, material and glue temperature: 20°C Wood moisture: 8 - 10% Relative humidity: 60 - 70% Apply adhesive evenly to both surfaces with spray gun Coverage Rate: 6 - 8 m2/Litre Allow adhesive to evaporate until it is no longer tacky to touch Evaporation Time @ 20°C: 5 - 10 minutes Join surfaces before end of open time: Open Time @ 20°C: 10 - 15 minutes Apply as much pressure as possible to obtain optimum bond strength
SURFACE PREPARATION
CLEAN UP Use THINNERS20 contact cleaner Adhesive is best Before: 12 months
- Decorative plastic laminates
- Fabric
- Cloth backed and polyester backed vinyls
- MDF and particleboard
- Timber
- Metal
- Concrete
- Glass
- Urethane foam
FIELDS OF APPLICATION
APPLICATION
Coverage rate, evaporation time, open time and press time are dependant on type of materials to be bonded as well as workshop conditions such as temperature and humidity
Do not use below 10°C as condensed water may form on the adhesive film and prevent bonding
Best results are obtained under the following conditions:
SURFACE PREPARATION
Surfaces to be bonded should be clean and free from oil, dust and other foreign materials. Metal surfaces should be degreased with CONTACT CLEANER - Order item code THINNERS20
CLEAN UP
Availability:
- Osborne Park: Back order
- Adelaide: Special order
- Wangara: Special order
- Bunbury: Back order
Product Information
Brochures & Downloads
Staff Information
Shopping Cart
Your shopping cart is empty.
| Subtotal | $0.00 |
|---|---|
| GST | $0.00 |
| Total | $0.00 |